mil-c-83733 backshells www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2004 glenair, inc. printed in u.s.a. e-3 cage code 06324 ?f? entry ?e? entry ?d? entry ?a? entry ?c? entry ?b? entry 1.38 (35.1) max b c a d 2.00 (50.8) g cable entry .62 (15.8) f e 507-062 emi/rfi backshell with lamp thread type split strain-relief for mil-c-83733 connectors 1. metric dimensions (mm) are indicated in parentheses. 2. when entry options ?c? and/or ?d? are se- lected, entry option ?b? cannot be selected. when ?c? and ?d? are selected on shell size a, the maximum dash number available is 02. 3. material/finish: backshell, adapter, clamp, ferrule = al alloy/see table iii hardware = sst/passivate sym. b m n nf table iii: finishes finish cadmium plate, olive drab electroless nickel cadmium plate, olive drab, over nickel cadmium plate, olive drab, over electroless nickel (500 hour salt spray) consult factory for other available finishes dash no. 01 02 03 04 05 06 table ii: cable entry e max .510 (13.0) .577 (14.7) .702 (17.8) .827 (21.0) .982 (24.9) 1.077 (27.4) min .062 (1.6) .125 (3.2) .250 (6.4) .250 (6.4) .375 (9.5) .500 (12.7) max .125 (3.2) .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) cable entry 507-062 m b a06 b03 e05 f04 e basic part no. finish (table iii) shell size (table i) e = strain relief, omit for gland nut entry location (a, b, c, d, e, f) and dash no. (table ii) - see note 2 shell size a b table i: dimensions a dim 2.095 (53.2) 3.395 (86.2) b dim 1.000 (25.4) 1.000 (25.4) c .005 (.1) 1.895 (48.1) 3.195 (81.2) d .005 (.1) .815 (20.7) .815 (20.7) max entry .750 (19.1) .750 (19.1) f entry max .078 (2.0) .203 (5.2) .328 (8.3) .453 (11.5) .578 (14.7) .703 (17.9) g max .78 (19.8) .97 (24.6) 1.05 (26.7) 1.16 (29.5) 1.22 (31.0) 1.34 (34.0)
|
